跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
意大利语

正翻译步骤 14

步骤 14
Use a spudger or a fingernail to disconnect the digitizer cable connector. If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.
Disconnect the digitizer cable
  • Use a spudger or a fingernail to disconnect the digitizer cable connector.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

Usa uno spudger o un'unghia per scollegare il connettore del cavo del digitizer.

Se qualche parte del tuo schermo non risponde al tocco dopo la riparazione, scollega la batteria e ricollega questo connettore, assicurandoti che si fissi correttamente e che non ci sia della polvere o altra sporcizia nella presa.

在开源创作共享许可协议下,你的投稿已被许可