跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
西班牙语

正翻译步骤 14

步骤 14
Use a spudger or a fingernail to disconnect the digitizer cable connector. If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.
Disconnect the digitizer cable
  • Use a spudger or a fingernail to disconnect the digitizer cable connector.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

Utiliza un spudger o una uña para desconectar el conector del cable del digitalizador.

Si alguna parte de la pantalla no responde al tacto después de la reparación, desconecta la batería y vuelva a colocar este conector, asegurándose de que encaje completamente en su lugar y de que no haya polvo u otra obstrucción en el zócalo.

在开源创作共享许可协议下,你的投稿已被许可