修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 7

步骤 7
Carefully disconnect the three antenna coax cables by prying them straight up from the logic board. Slide your tweezers or the pointed end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it. To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.
Disconnect the antenna cables

  • Carefully disconnect the three antenna coax cables by prying them straight up from the logic board.

  • Slide your tweezers or the pointed end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

断开天线电缆

将三根天线同轴电缆从主板上笔直撬起，小心地断开它们的连接。

将镊子或撬棒的尖端滑到每根电缆下方，直到靠近插座，然后轻轻扭曲或撬起以断开连接。

要重新连接每条电缆，请将接口直接对准其插座，然后向下按使其卡入到位。

在开源创作共享许可协议下，你的投稿已被许可。