2018年款13寸 MacBook Pro 底壳更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南。

英语

中文

上一步

正翻译步骤 7

步骤 7

Remove the lower case

Remove the lower case.
To reinstall the lower case:
Set it in place and align the sliding clips near the display hinge. Press down and slide the cover toward the hinge. It should stop sliding as the clips engage.
When the sliding clips are fully engaged and the lower case looks correctly aligned, press down firmly on the lower case to engage the four hidden clips underneath. You should feel and hear them snap into place.

拆下底壳

拆下底壳。
要重新安装底壳：
将其安装到位，并对齐显示屏铰链附近的滑动夹。向下按并将盖向铰链滑动。夹扣啮合后，它应停止滑动。
当滑动夹完全接合并且底壳看起来正确对齐时，用力向下按下底壳以接合下面的四个隐藏夹扣。你应该感觉到并听到它们卡入到位。