修复你的物品 社区 商店

2018年款带 Touch Bar 的13寸 MacBook Pro 电池更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。

返回指南
英语
中文
上一步

正翻译步骤 22

步骤 22
MacBook Pro 13" Touch Bar 2018 Battery Replacement, Battery installation: 步骤 0 中的图像 1，3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Battery installation: 步骤 0 中的图像 2，3 MacBook Pro 13" Touch Bar 2018 Battery Replacement, Battery installation: 步骤 0 中的图像 3，3
Battery installation

  • Double-check the fit and alignment of your new battery before sticking it down.

  • Be mindful of the battery data cable and make sure it doesn't get pinched or trapped under the battery board.

  • If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place.

  • Carefully position the battery and set it into place.

  • Place the battery close to the logic board so the trackpad cable can reach its connector.

  • Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.

电池安装

放下之前，请仔细检查新电池的安装和对准情况。

请注意电池数据线，并确保它不会被夹在电池板上。

如果你的电池底部预装有胶粘剂，请将其翻转过来并小心地剥离内衬以露出胶粘剂。如果电池没有粘合剂，请使用薄的双面胶带（例如Tesa 61395）将电池固定到位。

小心放置电池并将其放置到位。

牢牢按住每个电池单元格5-10秒钟，以将其固定到底部外壳。

[title] Battery installation
[* icon_reminder] Double-check the fit and alignment of your new battery before sticking it down.
[* black] Be mindful of the battery data cable and make sure it doesn't get pinched or trapped under the battery board.
[* black] If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as [product|IF317-072-4|Tesa 61395|new_window=true] to keep your battery in place.
[* black] Carefully position the battery and set it into place.
+ [* icon_note] Place the battery close to the logic board so the trackpad cable can reach its connector.
[* black] Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。