跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
中文

正翻译步骤 4

步骤 4
This step shows how to insert the pick without damaging the OLED panel. Do this before beginning to slice the adhesive. With the pick 1 mm into the gap, pivot the pick upwards to a steep angle. At a steep angle, carefully push the pick into the gap about 1/4 inch (6 mm). The pick should slide in below the OLED panel.
Guide the opening pick under the OLED panel
  • This step shows how to insert the pick without damaging the OLED panel. Do this before beginning to slice the adhesive.

  • With the pick 1 mm into the gap, pivot the pick upwards to a steep angle.

  • At a steep angle, carefully push the pick into the gap about 1/4 inch (6 mm). The pick should slide in below the OLED panel.

  • Stop if you feel the point of the pick hitting a ridge. The pick may be pressing against the edge of the OLED panel. Angle the pick and try again.

在不损坏OLED面板的前提下,并且在划开粘胶之前,这一步告诉你如何插入开机片。

开机片插入1毫米,然后向上翘起开机片尾部。

接上一步,把开机片小心地向下插入四分之一英寸(6毫米)。开机片应该滑进了OLED面板下面。

如果开机片前端有阻碍你需要停下来。有可能开机片碰到了屏幕面板,调整角度再试一下。

在开源创作共享许可协议下,你的投稿已被许可