跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南

英语
中文

正翻译步骤 1

步骤 1
You will need to pry the screen up to remove it from the phone. Read the following notes carefully before proceeding. Take note of the two seams on the edge of the phone: Screen seam: This seam separates the screen from the rest of the phone. This is where you should pry.
Precautionary notes
  • You will need to pry the screen up to remove it from the phone. Read the following notes carefully before proceeding.

  • Take note of the two seams on the edge of the phone:

  • Screen seam: This seam separates the screen from the rest of the phone. This is where you should pry.

  • Frame seam: This is where the plastic frame meets the back cover. It is held in place by screws. Do not pry at this seam.

  • Before you begin, note the following areas on the screen:

  • Screen flex cable: Do not insert the opening pick deeper than instructed or you risk damaging this cable.

  • Adhesive perimeter: Prying beyond this narrow perimeter without angling the pick will damage the OLED panel.

你需要把屏幕撬开并与手机分离。在开始前请仔细阅读以下注意事项。

在屏幕边缘标记出两个缝隙,如图。

屏幕边缝:这个边缝可以让屏幕与手机分离。你需要从这里撬开

边框缝:这是后盖与塑料边框交汇之处,由螺丝固定。请不要撬这里

开始之前做好标记。

屏幕排线:开盖器不要插入太深,黄色标记区,否则会损坏排线。

粘胶范围:当开盖片超过这个绿色范围需要调整角度,否则会损坏OLED面板。

在开源创作共享许可协议下,你的投稿已被许可