注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
With one hand holding the device in place, use your free hand to flip open the RF shield. Peel the three pieces of silver metallic tape off of the logic board.
  • With one hand holding the device in place, use your free hand to flip open the RF shield.

  • Peel the three pieces of silver metallic tape off of the logic board.

  • Do not peel off the two pieces of tape, that are located on the straightest edge of the RF shield closest to the edge of the phone.

  • Try not to damage the tape or the RF shield because they will need to be reused when reassembling the device.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可