跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Peel back the red pull tab and the black sticker from the edge of the battery. Pull the tab up steadily to break up the adhesive holding the battery in place. If the adhesive is too strong, place a heated iOpener  on the screen for two minutes or use a heat gun to soften the adhesive beneath the battery.
Remove the battery
  • Peel back the red pull tab and the black sticker from the edge of the battery.

  • Pull the tab up steadily to break up the adhesive holding the battery in place.

  • If the adhesive is too strong, place a heated iOpener on the screen for two minutes or use a heat gun to soften the adhesive beneath the battery.

剥去电池边缘的红色拉环和黑色贴纸。

稳固地向上拉起小拉条,以撕开将电池固定到位的粘合剂。

如果胶粘剂太粘,请将加热的 iOpener 放在屏幕上两分钟,或使用热风枪软化电池下方的胶粘剂。

在开源创作共享许可协议下,你的投稿已被许可