跳转到主内容
英语
法语

正翻译步骤 10

步骤 10
You can do this step before or after you remove the top. Careful, it is easily broken! (I re-attached mine tastefully with tape, having broken the attachment points. ;o) ) Take a piece of tape, preferably painters tape, and make a small tape T-handle on the rear Jura badge. A small piece of rubber might work or you might be able to get it off with just clean fingers and skin friction.
  • You can do this step before or after you remove the top.

  • Careful, it is easily broken! (I re-attached mine tastefully with tape, having broken the attachment points. ;o) )

  • Take a piece of tape, preferably painters tape, and make a small tape T-handle on the rear Jura badge. A small piece of rubber might work or you might be able to get it off with just clean fingers and skin friction.

  • Carefully push in and twist it to the left ~1/10 of a turn. Then, when you feel that it has come loose, pull it gently out to remove it. It is held in place by little lugs and pressure tangs.

  • After the rear Jura badge has been removed, behind it you will find two T15 Torx screws marked with red circles in the second picture. They must be removed.

  • You can then gently wiggle free the vertical plastic chrome piece that is on the rear - pull out and set that aside.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可