跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 10

步骤 10
If your motherboard has a socket for a hard drive temperature sensor, follow this step to plug the sensor wires in. Find the connector on the motherboard labeled HD TMP or HDD TEMP. If you have trouble locating it, trace the two-wire temperature cable you disconnected from the old hard drive.
  • If your motherboard has a socket for a hard drive temperature sensor, follow this step to plug the sensor wires in.

  • Find the connector on the motherboard labeled HD TMP or HDD TEMP.

  • If you have trouble locating it, trace the two-wire temperature cable you disconnected from the old hard drive.

  • If the previous temperature cable is still connected to the board here, disconnect and remove it. You will no longer need it.

  • Connect the temperature sensor's two-wire red-black cable to the motherboard plug labeled HD TMP or HDD TEMP.

  • The connector is keyed to fit in only one orientation. If it doesn't fit one way, rotate it 180° and try again.

  • Route the excess wire so it does not interfere with any other components.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可