跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 4

步骤 4
Peel the white liner off the back of the small temperature sensor board in order to expose the adhesive. Adhere the temperature sensor board to an exposed, metal surface of the SSD, close to the SATA connector. Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.
  • Peel the white liner off the back of the small temperature sensor board in order to expose the adhesive.

  • Adhere the temperature sensor board to an exposed, metal surface of the SSD, close to the SATA connector.

  • Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可