跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 5

步骤 5
Use your fingers to gently pull the ribbon cable straight out of its connector on the motherboard. Since this cable's pull tab is too small to grab with fingers or tweezers, grab the cable itself. Otherwise utilize pull tabs whenever possible.
  • Use your fingers to gently pull the ribbon cable straight out of its connector on the motherboard.

  • Since this cable's pull tab is too small to grab with fingers or tweezers, grab the cable itself. Otherwise utilize pull tabs whenever possible.

  • During reassembly, grab the ribbon cable by the blue tab and gently press the cable straight into the connector. Push the blue tab rather than the ribbon cable itself.

用手指轻轻地将带状电缆从主板上的连接器中直接拉出。

由于该电缆的拉条太小,无法用手指或镊子抓住,请抓住电缆本身。否则,请尽可能使用小拉条。

在重新组装过程中,抓住带状电缆的蓝色卡舌,轻轻地将电缆直接压入连接器。推动蓝色标签而不是带状电缆本身。

在开源创作共享许可协议下,你的投稿已被许可