跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的20指南

英语
中文

正翻译步骤 4

步骤 4
Repeat the previous heating and cutting procedure for the remaining three sides of the phone. Leave an opening pick on each side as you continue to the next to prevent the adhesive from resealing. The rear cover will begin to separate from the phone as you finish all sides of the phone.
Slice around the perimeter of the phone
  • Repeat the previous heating and cutting procedure for the remaining three sides of the phone.

  • Leave an opening pick on each side as you continue to the next to prevent the adhesive from resealing.

  • The rear cover will begin to separate from the phone as you finish all sides of the phone.

对手机的其余三个侧面重复前面的加热和切割步骤。

继续进行下一步操作时,请在每侧留一个三角撬片,以防止粘合剂重新密封。

完成手机的所有侧面后,后面板将开始与手机分离。

[title] Slice around the perimeter of the phone
[* black] Repeat the previous heating and cutting procedure for the remaining three sides of the phone.
[* black] Leave an opening pick on each side as you continue to the next to prevent the adhesive from resealing.
-[* icon_note] The back panel will begin to separate from the phone as you finish all sides of the phone.
+[* icon_note] The rear cover will begin to separate from the phone as you finish all sides of the phone.

在开源创作共享许可协议下,你的投稿已被许可