跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南

英语
中文

正翻译步骤 2

步骤 2
Apply a suction cup to the heated edge of the back panel, as close to the edge as possible. If your back glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken panel. Pull up on the suction cup with strong, steady force to create a gap between the back panel and the frame.
Insert an opening pick
  • Apply a suction cup to the heated edge of the back panel, as close to the edge as possible.

  • If your back glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken panel.

  • Pull up on the suction cup with strong, steady force to create a gap between the back panel and the frame.

  • Depending on the age of your phone, this may be difficult. If you are having trouble, apply more heat to the edge and try again.

  • Insert the point of an opening pick into the gap.

在后面板的加热边缘上应用吸盘,并尽可能靠近边缘。

如果后玻璃破裂严重,用透明的包装胶带覆盖它可能会使吸盘粘附。或者,可以使用非常坚固的胶带代替吸盘。如果其他所有方法均失败,则可以将吸盘粘在破碎的面板上。

用强大的稳定力向上拉动吸盘,以在后面板和框架之间形成一个间隙。

根据你手机的机龄,这可能很困难。如果遇到问题,请对边缘加热更多,然后重试。

将三角撬片的尖端插入间隙中。

在开源创作共享许可协议下,你的投稿已被许可