跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Apply a suction cup to the back of the battery. Pull up on the suction cup with strong, steady force to begin to separate the battery from the frame. If this is difficult, apply a few more drops of isopropyl alcohol underneath the battery, let it sit for two minutes, and try again.
Remove the battery
  • Apply a suction cup to the back of the battery.

  • Pull up on the suction cup with strong, steady force to begin to separate the battery from the frame.

  • If this is difficult, apply a few more drops of isopropyl alcohol underneath the battery, let it sit for two minutes, and try again.

  • Insert the point of an opening pick into the gap created between the battery and frame.

  • Don't insert the opening pick more than halfway or you risk damaging the fingerprint sensor underneath.

  • Pull up on the suction cup to remove the battery.

  • The battery will come out without much force once the isopropyl alcohol has adequately penetrated the battery adhesive.

  • When you're reassembling your phone, remove the old adhesive and apply stretch release adhesive strips, double sided adhesive tape, or pre-cut adhesive to secure the new battery.

将吸盘套在电池背面。

用强大的稳定力向上拉起吸盘,以开始将电池与框架分离。

如果这很困难,请在电池下面再加几滴异丙醇,静置两分钟,然后重试。

将三角撬片的尖端插入电池和框架之间形成的间隙中。

将三角撬片的尖端插入电池和框架之间形成的间隙中。

向上拉起吸盘以取出电池。

一旦异丙醇充分渗入电池粘合剂,电池将不会用力过大。

重新组装手机时,请去除旧的胶粘剂并涂上可拉伸释放的胶条,双面胶或预切胶,以固定新电池。

在开源创作共享许可协议下,你的投稿已被许可