iMac Intel 21.5" Display Adhesive Strips Replacement (Custom Notch)

英语

中文

上一步下一步

正翻译步骤 13

步骤 13

iMac Intel 21.5" Display Adhesive Strips Replacement (Custom Notch): 步骤 0 中的图像 1，3

iMac Intel 21.5" Display Adhesive Strips Replacement (Custom Notch): 步骤 0 中的图像 2，3

iMac Intel 21.5" Display Adhesive Strips Replacement (Custom Notch): 步骤 0 中的图像 3，3

Measuring from the left end of strip 4R (the end with the labels) make two marks on the strip as guides for where to cut.
Make the first mark 1⅛ inches (28.6 mm) from the left edge.
Make the next mark 1¾ inches (44.5 mm) from the left edge.
Measuring from the bottom edge of the strip, make a third mark in between the first two 5/32 inches (4 mm) up from the bottom edge.
This cut will be very close to the top edge of the adhesive strip, but it's important that you leave material over top of the adhesive strip for proper sound isolation. When in doubt, remove less material than you think you need to. If the adhesive still covers the microphone you can always make the notch bigger.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。