跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Gently pry open the top panel of the drone using a spudger. Do not completely remove the panel, as there will still be wired connections between the two halves.
  • Gently pry open the top panel of the drone using a spudger.

  • Do not completely remove the panel, as there will still be wired connections between the two halves.

  • Rotate the top panel slightly to reveal the four screws beneath each propellor arm.

  • Remove each of the four screws with a Phillips #0 screwdriver.

  • Lift off the top panel, as it should now be free from the rest of the device.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可