跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 3

步骤 3
Lay the watch face down. Carefully lift the back cover up from the edge with the buttons to access the sensor connector. Use the flat end of a spudger to pry up and disconnect the sensor flex cable from the motherboard.
Disconnect the sensor flex cable
  • Lay the watch face down.

  • Carefully lift the back cover up from the edge with the buttons to access the sensor connector.

  • Use the flat end of a spudger to pry up and disconnect the sensor flex cable from the motherboard.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可