跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Insert an opening pick into the gap between the battery and the wall of the battery well. Carefully dig the tip of the opening pick underneath the battery and slide it along the edge to begin slicing the adhesive. Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.
  • Insert an opening pick into the gap between the battery and the wall of the battery well.

  • Carefully dig the tip of the opening pick underneath the battery and slide it along the edge to begin slicing the adhesive.

  • Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.

在电池和电池槽壁之间的间隙中插入一个三角撬片。

仔细挖开电池下方的开口尖的尖端,然后将其沿边缘滑动,以开始切割粘合剂。

注意不要用工具刺穿或弯曲电池——刺穿或弯曲的电池可能会泄漏危险的化学物质或引起热事件。

在开源创作共享许可协议下,你的投稿已被许可