跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的30指南

英语
意大利语

正翻译步骤 2

步骤 2
Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad. Rotate the LCD along its left edge and lay it down on top of the front glass panel. Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.
  • Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.

  • Rotate the LCD along its left edge and lay it down on top of the front glass panel.

  • Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

Usando uno strumento di apertura in plastica o uno spudger, solleva il bordo destro del pannello LCD dall'iPad.

Ruota il pannello LCD attorno al suo bordo sinistro ed appoggialo sopra il vetro anteriore.

Stai attento mentre muovi il pannello LCD. Il cavo a nastro è delicato e potrebbe rompersi se si piega troppo.

在开源创作共享许可协议下,你的投稿已被许可