跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
The stretch release adhesive strips will be applied to the rear of the replacement battery, and may need to be cut to length.
Align the adhesive strips
  • The stretch release adhesive strips will be applied to the rear of the replacement battery, and may need to be cut to length.

  • If you do not need to cut the adhesive strips to length, skip the next two steps.

  • Lay the stretch release adhesive strips next to your replacement battery, aligning the pull tabs slightly above the top edge of the battery.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可