跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 18

步骤 18
With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case. If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area. Begin to lift the top of the display up from the frame.
  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

如图所示,在插卡插入到角落的地方时,轻轻地扭转插卡以增加显示屏和外壳之间的间隙。

如果有任何部分似乎粘着并且不会分开,请停止扭曲并使用其中一张卡片在有问题的地方剪掉粘合剂。

开始从框架上抬起显示器的顶部。

仅将显示器抬起几英寸——它仍通过数据线和电源线连接到iMac。

在开源创作共享许可协议下,你的投稿已被许可