修复你的物品 社区 商店

三星盖乐世S20后盖拆卸

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的17指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 5

步骤 5
Samsung Galaxy S20 Back Cover Removal, Separate the left edge adhesive: 步骤 0 中的图像 1，3 Samsung Galaxy S20 Back Cover Removal, Separate the left edge adhesive: 步骤 0 中的图像 2，3 Samsung Galaxy S20 Back Cover Removal, Separate the left edge adhesive: 步骤 0 中的图像 3，3
Separate the left edge adhesive

  • Apply a suction cup to the back of the phone, as close to the center of the left edge as possible.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • As the glass on this edge is curved, you won't be able to insert this pick very far. As long as the very tip of the pick is underneath the glass's edge, you will be able to proceed.

  • Due to tight tolerances, this may take multiple attempts.

  • If you are having trouble creating a gap, apply more heat to the edge and try again.

  • You can try also applying a few drops of high concentration (over 90%) isopropyl alcohol into the seam to help loosen the adhesive.

  • Do not apply excessive force with the pick, or you risk cracking the back cover glass.

分离左边缘粘合剂

将吸盘套在手机背面，并尽可能靠近左边缘的中心。

用强大的稳定力拉动吸盘，以在后盖和框架之间形成一个间隙。

将三角撬片的尖端插入间隙中。

由于此边缘上的玻璃是弯曲的，因此你无法将此镐插入很远。只要三角撬片的最尖端在玻璃边缘下方，你就可以继续进行。

由于严格的公差，可能需要多次尝试。

如果你在创建间隙时遇到问题，请对边缘加热更多，然后重试。

你也可以尝试在接缝中滴几滴高浓度（超过90％）的异丙醇，以帮助松开粘合剂。

请勿用三角撬片用力过猛，否则有破裂后盖玻璃的危险。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。