注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
There is one main ribbon cable that needs to be disconnected from the motherboard using the pudger and tweezers. It is best to remove the flash assembly at the same time as the lens and motor assembly.
  • There is one main ribbon cable that needs to be disconnected from the motherboard using the pudger and tweezers.

  • It is best to remove the flash assembly at the same time as the lens and motor assembly.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可