注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 1

步骤 1
There are two 3.25mm screws that hold the tripod mount in the camera. The first screw is located on the back of the camera above the tripod mount.
  • There are two 3.25mm screws that hold the tripod mount in the camera.

  • The first screw is located on the back of the camera above the tripod mount.

  • The second screw is located on the lens side of the camera above the tripod mount.

  • Remove the second screw using the Phillips 00 Screwdriver.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可