翻译步骤＃2 - Canon PowerShot SD 600 Rear Control Board Replacement - iFixit

取消

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。

英语

中文

上一步下一步

正翻译步骤 2

步骤 2

Using the spudger, gently push up the board from the pins underneath it.

Follow the board up and around the camera, gently unseating the board and cables.

The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear accessory board.

Using the spudger, gently push up the board from the pins underneath it.
Follow the board up and around the camera, gently unseating the board and cables.
The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear accessory board.
For best results, grip the tweezers as close to the plug as possible.

在开源创作共享许可协议下，你的投稿已被许可。