翻译步骤＃1 - Canon PowerShot SD 600 Rear Control Board Replacement - iFixit

取消

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

First it is necessary to remove the ribbon cable connecting the control board to the [green] rear accessory board on the camera.

First it is necessary to remove the ribbon cable connecting the control board to the [green] rear accessory board on the camera.
This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the spudger.

在开源创作共享许可协议下，你的投稿已被许可。