翻译步骤＃1 - Canon PowerShot SD 600 Exterior Frame Replacement - iFixit

取消

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

There are six 3mm exterior screws that will need to be removed in order to remove the exterior frame.

Two screws near the tripod mount on the underside of the camera.

Two screws on the camera left hand side (the face with nothing but screws on it).

There are six 3mm exterior screws that will need to be removed in order to remove the exterior frame.
Two screws near the tripod mount on the underside of the camera.
Two screws on the camera left hand side (the face with nothing but screws on it).
Two screws on the camera right hand side, by the wrist strap attachment.
Remove the screws using the screwdriver.
It is important to note that the camera has been rotated from the previous orientation in order to show the screws properly.

在开源创作共享许可协议下，你的投稿已被许可。