修复你的物品 社区 商店

后盖移除

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南。

返回指南
英语
中文
上一步

正翻译步骤 11

步骤 11
Back Cover Removal: 步骤 0 中的图像 1，1

  • Remove the back cover.

  • To re-install the back cover:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive. You don't have to clear out adhesive down to the plastic but larger pieces should be removed.

  • Turn on your phone and test your repair before installing new adhesive and resealing the phone.

  • Carefully apply the new adhesive to the back cover, then line up one edge of the glass against the phone chassis and firmly press the glass into the phone.

卸下后盖。

要安装后盖：

使用镊子将手机机壳上残留的胶粘剂剥离掉。然后用高浓度异丙醇（至少90％）和无绒布清洁粘合区域，以准备用于新粘合剂的表面。

小心地将新粘合剂涂在后盖上，然后将玻璃的一个边缘对准手机底盘，然后将玻璃牢固地按入手机中。

或者，你可以重新安装后盖，而无需更换粘合剂。除去可能阻止后盖齐平坐下的所有大块粘合剂。安装后，加热后盖并施加压力以将其固定。它不会防水，但胶水通常坚固到足以容纳。

在安装新的粘合剂并重新密封手机之前，请确保打开手机并测试维修情况。

[* black] Remove the back cover.
-[* icon_reminder] To install a back cover:
- [* black] Use tweezers to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive.
+[* icon_reminder] To re-install the back cover:
+ [* black] Use [product|IF145-020|tweezers] to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive. You don't have to clear out adhesive down to the plastic but larger pieces should be removed.
+ [* black] Turn on your phone and test your repair before installing new adhesive and resealing the phone.
[* black] Carefully apply the new adhesive to the back cover, then line up one edge of the glass against the phone chassis and firmly press the glass into the phone.
- [* icon_note] Alternatively, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.
-[* icon_note] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。