跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 1

步骤 1
First it is necessary to remove the ribbon cable connecting the control board to the [green] rear accessory board  on the camera.
  • First it is necessary to remove the ribbon cable connecting the control board to the [green] rear accessory board on the camera.

  • This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the spudger.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可