跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Use a pair of tweezers or the pointed end of a spudger to peel up the back panel's microphone. Before you install a replacement LED flash module, check the microphone's adhesive gasket:
  • Use a pair of tweezers or the pointed end of a spudger to peel up the back panel's microphone.

  • Before you install a replacement LED flash module, check the microphone's adhesive gasket:

  • If it is in good condition, you can re-use the gasket. Make sure that the gasket does not cover the hole.

  • If the gasket is pulled out of place, remove it and replace the adhesive with a pre-cut strip or Tesa tape.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可