跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南

英语
西班牙语

正翻译步骤 2

步骤 2
Apply a suction cup to the heated edge of the back panel by pressing down on it to create suction, as close to the edge as possible. If your back glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken panel.
Apply a suction cup
  • Apply a suction cup to the heated edge of the back panel by pressing down on it to create suction, as close to the edge as possible.

  • If your back glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken panel.

Aplica una ventosa al borde calienta del panel trasero presionándolo para crear succión, lo más cerca posible del borde.

Si el cristal trasero está muy agrietado, cubriéndolo con una capa de cinta de embalaje transparente puede permitir que la ventosa se adhiera. Alternativamente, se puede usar cinta muy fuerte en lugar de la ventosa. Si todo lo demás falla, puedes pegar la ventosa al panel roto.

在开源创作共享许可协议下,你的投稿已被许可