跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 2

步骤 2
Make sure to take care in prying case apart. There are two wires (one red and one black) that could get disconnected from the motherboard. Gently seperate the two halves of the device. To remove the circuit board from the right section of the device, unscrew the two 5.6 mm Phillips #00 screws.
  • Make sure to take care in prying case apart. There are two wires (one red and one black) that could get disconnected from the motherboard.

  • Gently seperate the two halves of the device.

  • To remove the circuit board from the right section of the device, unscrew the two 5.6 mm Phillips #00 screws.

  • When the screws have been fully unscrewed, use the tweezers to remove them from the device.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可