跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 3

步骤 3
Turn the device over so that the lens is facing downward.  Take care not to detach any wires during this step. Locate and unscrew the two 5.6 mm Phillips #00 screws holding the lens to the board. Turn the device back over so that the lens faces upward, and carefully remove the lens from the board.
  • Turn the device over so that the lens is facing downward. Take care not to detach any wires during this step.

  • Locate and unscrew the two 5.6 mm Phillips #00 screws holding the lens to the board.

  • Turn the device back over so that the lens faces upward, and carefully remove the lens from the board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可