注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
There are two wires (one red and one black) that could get disconnected from the motherboard when prying the case apart. Gently seperate the two halves of the device. To remove the circuit board from the right section of the device, unscrew the two 5.6 mm Phillips #00 screws.
  • There are two wires (one red and one black) that could get disconnected from the motherboard when prying the case apart.

  • Gently seperate the two halves of the device.

  • To remove the circuit board from the right section of the device, unscrew the two 5.6 mm Phillips #00 screws.

  • When the screws have been fully unscrewed, use the tweezers to remove them from the device.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可