跳转到主内容
英语
中文

正翻译步骤 10

步骤 10
We head south, and with the bottom cover removed, we find a jungle of cables and rubber gaskets. Rule #19 in the scout’s handbook: Never forget the SIM card tray. Rule #21: Use as many tools simultaneously as you can. All those components are individually replaceable: From the USB-C port through the interconnect cables, over to the vibration motor, finger print sensor, and its breakout cable.
  • We head south, and with the bottom cover removed, we find a jungle of cables and rubber gaskets.

  • Rule #19 in the scout’s handbook: Never forget the SIM card tray. Rule #21: Use as many tools simultaneously as you can.

  • All those components are individually replaceable: From the USB-C port through the interconnect cables, over to the vibration motor, finger print sensor, and its breakout cable.

  • On the daughterboard, we spot one connector that has no rubber gasket around it—the display connector. But don’t panic—the cable from the display carries the gasket.

我们向南行驶,卸下底盖,我们发现了电缆和橡胶垫圈的丛林。

侦查员手册中的规则第19条:永远不要忘记SIM卡托盘。规则第21条:同时使用尽可能多的工具。

所有这些组件均可单独更换:从USB-C端口到互连电缆,再到振动电机,指纹传感器及其分支电缆。

在子板上,我们发现一个接口周围没有橡胶垫圈,即显示接口。但不要惊慌——显示器的电缆带有垫圈。

在开源创作共享许可协议下,你的投稿已被许可