跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 1

步骤 1
Use the flat end of a spudger to pry and disconnect the three antenna cable connectors from the AirPort board. The three cables are coded with black sleeves of different lengths. During reassembly: Connect the long-sleeved cable to the socket closest to the ports.
  • Use the flat end of a spudger to pry and disconnect the three antenna cable connectors from the AirPort board.

  • The three cables are coded with black sleeves of different lengths. During reassembly:

  • Connect the long-sleeved cable to the socket closest to the ports.

  • The short-sleeved cable connects next to the screw.

  • The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可