跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 1

步骤 1
Use the tip of a spudger to push the iSight camera cable connector straight away from its socket on the logic board. It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.
  • Use the tip of a spudger to push the iSight camera cable connector straight away from its socket on the logic board.

  • It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可