翻译步骤＃6 - MacBook Pro 13" Retina Display Late 2012 Display Assembly Replacement - iFixit

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。

英语

中文

上一步下一步

正翻译步骤 6

步骤 6

Open the MacBook Pro approximately 110 degrees, and place it sideways on the table, as shown.

While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the upper display bracket.

Open the MacBook Pro approximately 110 degrees, and place it sideways on the table, as shown.
While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the upper display bracket.
Be sure to hold the display and upper case together with your left hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.
Remove the last remaining T8 Torx screw securing the display to the upper case.

在开源创作共享许可协议下，你的投稿已被许可。