跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
中文

正翻译步骤 1

Step 1
Using a Torx T6 screwdriver, remove all six 1/8 inch screws (marked in red) from the back case. Set screws aside. The SIM card has been removed here to prevent damage to the card. This is recommended, but not not required.
  • Using a Torx T6 screwdriver, remove all six 1/8 inch screws (marked in red) from the back case. Set screws aside.

  • The SIM card has been removed here to prevent damage to the card. This is recommended, but not not required.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可