注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南。
正翻译步骤 2
步骤 2
-
Slide the tip of a spudger underneath the left speaker cable and pry straight up to disconnect the speaker.
-
With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。