翻译步骤＃3 - Logic Board Disconnection - iFixit

修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南。

英语

中文

上一步下一步

正翻译步骤 3

步骤 3

Slide the tip of a spudger underneath the speaker cable and pry straight up to disconnect the speaker.

With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board.

With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board.

Slide the tip of a spudger underneath the speaker cable and pry straight up to disconnect the speaker.
With the connector disconnected, slide the flat end of a spudger under the cable to separate the adhesive securing the cable to the logic board.

在开源创作共享许可协议下，你的投稿已被许可。