跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的27指南

英语
中文

正翻译步骤 1

步骤 1
Before starting this procedure, you must disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot.
Remove the screws securing the lower case
  • Before starting this procedure, you must disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot.

  • Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.

  • Use a P5 driver to remove the following screws:

  • Two 7.9 mm screws

  • Two 7.1 mm screws

  • Six 2.6 mm screws

在开始此过程之前,必须禁用Mac的自动重启功能。打开盖子时,Mac上的自动启动功能会打开,并且在拆卸过程中可能会意外触发。

使用本指南或按照下面的缩写说明禁用自动启动。开始之前,请完全关闭电源并拔下MacBook Air的电源。关闭显示屏,然后将整个笔记本电脑上下翻转。

使用P5 螺丝刀卸下以下螺丝:

2个7.9毫米螺丝

2个7.1毫米螺丝

6个2.6毫米螺丝

在开源创作共享许可协议下,你的投稿已被许可