跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 7

步骤 7
Carefully disconnect the two antenna coax cables by prying them straight up from the logic board. Slide your tweezers or spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it. To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.
Disconnect the antennas
  • Carefully disconnect the two antenna coax cables by prying them straight up from the logic board.

  • Slide your tweezers or spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

从主板上直接撬起两根天线同轴电缆,小心地断开它们。

将镊子或撬棒滑到每根电缆下方,直到它靠近插座,然后轻轻扭动或撬起以断开它。

要重新连接每根电缆,请将接口直接对准其插座,然后向下按压使其卡入到位。

在开源创作共享许可协议下,你的投稿已被许可