注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南。
正翻译步骤 4
步骤 4
-
Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.
-
If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. Be careful not to overheat the battery.
| [* black] [guide|25705|Prepare an iOpener|new_window=true] and lay it on top of the trackpad ribbon [* black] If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. [* black] Apply heat for approximately one minute in order to soften the adhesive securing the trackpad ribbon cable |
| [* black] [guide|25705|Prepare an iOpener|new_window=true] and lay it on top of the trackpad ribbon [* black] If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. [* black] Apply heat for approximately one minute in order to soften the adhesive securing the trackpad ribbon cable |