Galaxy S20 无线充电线圈更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的13本指南。

英语

中文

上一步

正翻译步骤 3

步骤 3

Remove the wireless charging coil

Gently peel the wireless charging coil away from the device.
Remove the wireless charging coil.
The coil is connected to the rest of the device via spring contacts, so there is no need to disconnect any connectors.
During reassembly, refasten the motherboard bracket screws first to properly align the charging coil into place, then firmly press the rest of the coil down to adhere it.

移除无线充电线圈

轻轻将无线充电线圈从设备上剥下。
卸下无线充电线圈。
线圈通过弹簧触点连接到设备的其余部分，因此无需断开任何连接器。
在重新组装过程中，请先重新拧紧主板支架上的螺丝，以将充电线圈正确地对准到位，然后用力将其余的线圈向下压以使其粘附。