跳转到主内容
英语
中文

正翻译步骤 9

步骤 9
Thread the display flex cable through the gap in the midframe and remove the display. Before installing a new display, remove all traces of the old adhesive from the frame, and clean the glued areas with isopropyl alcohol (>90%) and a lint-free cloth. If your replacement part doesn't come with preattached adhesive, the best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.
  • Thread the display flex cable through the gap in the midframe and remove the display.

  • Before installing a new display, remove all traces of the old adhesive from the frame, and clean the glued areas with isopropyl alcohol (>90%) and a lint-free cloth.

  • If your replacement part doesn't come with preattached adhesive, the best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

将显示屏弯曲电缆穿过中框的间隙,然后卸下显示屏。

在安装新显示器之前,请从框架上清除所有旧粘合剂的痕迹,然后用异丙醇(> 90%)和无绒布清洁粘合区域。

如果你的更换零件没有预粘的胶粘剂,则固定新屏幕的最佳方法是使用一张定制的双面胶带。将胶带粘贴到屏幕背面,然后小心地将显示屏电缆穿过框架。对齐屏幕,然后将其按入到位。

在开源创作共享许可协议下,你的投稿已被许可