跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed. Once the screen is warm to the touch, apply a suction cup  to the bottom edge of the phone. Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.
  • If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.

  • Once the screen is warm to the touch, apply a suction cup to the bottom edge of the phone.

  • Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.

当屏幕变热时,将吸盘套在手机的底部边缘。

向上拉起吸盘,然后在显示屏玻璃和中框之间的间隙中插入一个三角撬片。通过将三角撬片滑动到右下角开始切割粘合剂。

在开源创作共享许可协议下,你的投稿已被许可