跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Disconnect the battery cable by pinching the battery connector and pulling it out.
replace battery
  • Disconnect the battery cable by pinching the battery connector and pulling it out.

  • Remove the battery and bracket.

  • Holding the battery so that the vent hole faces up and the Philips logo faces out, thread the battery cable through the battery bracket. Position and place the battery inside the battery compartment.

  • Pinching the end of the battery connector, plug it in so that it locks in place.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可